HyperDeck Studio HD Mini
This small HyperDeck Studio model has the form factor of the Teranex Minis. The modular design allows three HyperDeck Studio HD Minis to be installed in a Teranex Mini Rack Shelf on one rack width. Alternatively, place the Minis alongside other products such as mixers, converters or streaming processors. The Minis are small with powerful features: 3G-SDI inputs and outputs, HDMI output, dual SD card slots, built-in clock and timecode generators, front panel controls, and AC and DC power jacks. Connected to a computer via the USB port, your HyperDeck Studio HD Mini acts like a webcam and you can use any video software.
Connections:
- SDI video inputs: 1
- SDI video outputs: 1
- SDI rates: 270 Mbps; 1.5 G; 3 G
- HDMI video outputs: 1
- Screen: 2.2-inch LCD
- Time code connections: 1 BNC input, 1 BNC output
- Reference connections: 1 BNC input, 1 BNC output; Tri-Sync or Black Burst
- SDI audio inputs: 16 embedded audio channels
- SDI audio outputs: 16 embedded audio channels
- HDMI audio outputs: 8 embedded audio channels
- Remote control: 1 RS-422 input
- Recorder configuration: via user interface or Blackmagic HyperDeck Ethernet Protocol
- Ethernet: 1 Gbps
- Computer interface: 1 USB-C-3.0 (up to 5 Gb/s) for recording to external drives, webcam output, software configuration and updates
Standards:
- SD video standards: 525i/59.94 NTSC; 625i/50 PAL
- HD video standards:
- 720p/50; 720p/59.94; 720p/60
- 1080i/50; 1080i/59.94; 1080i/60
- 1080p/23.98; 1080p/24; 1080p/25; 1080p/29.97; 1080p/30; 1080p/50; 1080p/59.94; 1080p/60
- 1080PsF/23.98; 1080PsF/24; 1080PsF/25; 1080PsF/29.97; 1080PsF/30
- 2K DCI video standards: 2Kp/23.98 DCI; 2Kp/24 DCI; 2Kp/25 DCI; 2Kp/29.97 DCI; 2Kp/30 DCI
- SDI compliance: SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M Level A and B, SMPTE 2084 and SMPTE 2108-1
- Supported SDI metadata: HD RP188 and Closed Captioning CEA-708. HDR metadata supported via SDI.
- Supported HDMI formats:
- 525i/59.94 NTSC; 625i/50 PAL,
- 720p/50; 720p/59.94; 720p/60
- 1080i/50; 1080i/59.94; 1080i/60
- 1080p/23.98; 1080p/24; 1080p/25; 1080p/29.97; 1080p/30; 1080p/50; 1080p/59.94; 1080p/60
- 2Kp/23,98 DCI; 2Kp/24 DCI; 2Kp/25 DCI; 2Kp/29,97 DCI; 2Kp/30 DCI
- 2160p/23.98; 2160p/24; 2160p/25; 2160p/29.97, 2160p/30
- 4Kp/23.98 DCI; 4Kp/24 DCI; 4Kp/25 DCI; 4Kp/29.97 DCI; 4Kp/30 DCI
- Audio sampling: standard television sampling rate of 48 kHz and 24 bit
- Video sampling rate: 4:2:2 YUV
- Colour accuracy: 10 bit
- Colour spaces: Rec. 601, Rec. 709, Rec. 2020
- HDR support: Hybrid Log-Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084
- Multirate support: Automatic detection of SD and HD
- Copy protection: No copy-protected HDMI sources can be recorded via the HDMI input. Always check copyright before recording or distributing content
Media:
- Media: 2 SD card slots, 1 USB-C 3.0 expansion port for external recording in SD, HD and 2K DCI
- Media type: UHS-I and UHS-II SD cards
- Storage media format: formats media in ExFAT (Windows/Mac) or HFS+ (Mac) file systems
Supported codecs:
- ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime for all formats up to 1080p/60
- DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF for 720p and 1080p HD formats up to 60 fps
- H.264 SDI 4:2:2 10 bit, H.264 High 4:2:0 8 bit, H.264 Medium 4:2:0 8 bit and H.264 Low 4:2:0 8 bit for all progressive scan formats up to 1080p/60
Controls:
- Built-in control panel: 8 buttons for transport and unit control with seek slider and 2.2" colour display
- External control: RS-422 deck control, SDI start/stop, timecode run. Blackmagic HyperDeck Ethernet Protocol included
- Supports remote file uploads via FTP
Included software:
- Blackmagic OS
- Blackmagic HyperDeck Setup
- Product software upgrades loaded at boot-up or via Blackmagic HyperDeck Setup through the USB port
Operating Systems:
- Mac Catalina 10.15, Mac Big Sur 11.1 or higher
- Windows 10, 64 bit
Screens:
- Built-in 2.2-inch LCD for monitoring video, audio and timecode, and menu settings
- LED indicators above the SD card slots
Power requirements:
- Power supply: 1 integrated AC power supply for 100?240 V, 50/60 Hz; 1x 12V DC power supply with 5.5mm hollow plug for external power supply or battery operation
- Power consumption: maximum 50 watts
Physical specifications:
- 1 height unit, one-third rack width
- Dimensions: 140 x 177 x 44.2 mm
- Weight: 820 g
Trebate dodatne informacije o ovom artiklu?
Pošaljite nam upit